Icom Mba-5 Bracket (with1/4-20)&magnetsfor Radio

NO MBF1 Suction Cup Mount. >>>This listing is for the IMPROVED MBA-5 / MBA5 BRACKET and Magnets + screws + lock washers ONLY <<< Made in Idaho USA of High Temperature Hard Composite with Steel inserts and supplied with Neodymium Magnets and screws & lock washers. <<<
>>>Will accept my Heavy Duty AMPs Pattern 4 hole adapter plate with centered 1/4-20 threaded port , adapter plate made of the same high temp ABS Composite !!! <<<
>>> Has Neo Magnets for removable use BUT can also be used in a FIXED to head configuration without magnets. <<<
>>>Simply insert a punch etc thru the front and pop the back insert caps off and attach MBA fixed to back of your remote head with longer screws supplied with washers and lock washers. <<<
>>>Made for Icom IC-2730 Remote Radio Head but will also fit the icom ID-5100 Head as both Radio Head backs have the same screw hole spacing. <<>>> Compare to thin China Tin MBA - 5 bracket at DX Eng or Giga for $37 to $39 !!! <<< This is HD Composite and Steel inserts with added 1/4-20 port <<<
>>>This DSCP IMPROVED MBA-5 Radio Head Mount Bracket & Magnets has: >>>
Standard 4 Hole AMPs holes in the Center ,
Port in Center to attach to the Icom MBF1 Suction Cup Mount ( not provided ),
This MBA5 also has the 4 outer small holes to screw the bracket to a shelf,
This DSCP Improved MBA-5 Bracket also has a added Lower Port to attach to Photo Screw 1/4-20 Mount. <<<
Two photos show a 17.1 oz block simulating a radio head and the Icom heads are half that weight.
>>>No MBF1 Suction Cup Mount. <<<
>>>No Steel 3 Lb Base please see my other listing for that Combo. <<<
>>> 1each Remote Head Mount Bracket Improved MBA5 & Magnets & Screws & Lock washers only , for Icom Controller Heads IC2730 only No Radio Heads and NO MBF1 Suction Cup Mount. <<<
Made and In Stock in Idaho USA and ships same to next day. <<< NO Radios or MBF1 or 3Lb Steel Base included. .<<<
In Stock and ships from Idaho USA with Heavy Duty Improved Construction made of a Thick Stiff Hard Temperature Stabile Composite with Steel and Brass Inserts ; and not a cheap China tin stamping.<<<
Improved Heavy Duty Composite and Steel design by DSCP this STIFF THICK MBA5 Controller Head Bracket with Strong Neodymium Magnets made for Icom IC2730 and MBF1 Suction Cup Mount that’s not included. <<<
>>>Heavy Duty DSCP MBA5 Bracket is Improved Thick Stiff Remote Head Controller Head Bracket that has >>> 1/4-20 threaded port <<< and you can attach to standard photo head mounts and also to a Icom MBF1 Suction (Mount NOT included ) suction cup mount , and you can attach to a Tilt Head Ball Mount via the 1/4-20 threaded port , and to 4 outer holes to screw to a surface like at your stations desk shelf. <<<
>>>Please see my separate listing for 3Lb Steel Base with 1/4-20 tilt ball stand. <<<
>>>Also just introduced is a 1.2Lb HD Icom Hand Microphone Mount Holder that screws down to a bench or bolts to my 3Lb Steel Base. <<<

Returns Accepted for this item if it's within 30 Days